Appendix A. Restoration Of Factory Defaults - peplink balance ONE User Manual
Peplink balance multi-wan bonding routers
For more information, please visit peplink.com
Hide thumbs
Also See for balance ONE:
- User manual (228 pages) ,
- Manual (2 pages) ,
- User manual (213 pages)
Table of Contents
Advertisement
USER MANUAL
Peplink Balance Series
Appendix A. Restoration of Factory Defaults
To restore the factory default settings on a Peplink Balance unit, perform the following:
For Balance models with a reset button:
1.
Locate the reset button on the Peplink Balance unit.
2.
With a paper clip, press and keep the reset button pressed for at least 10
seconds, until the unit reboots itself.
For Balance/MediaFast models with an LCD menu:
Use the buttons on front panel to control the LCD menu to go to
Maintenance>Factory Defaults, and then choose Yes to confirm.
Afterwards, the factory default settings will be restored.
All user settings will be lost after restoring the factory default settings. Regular backup of configuration
parameters is strongly recommended.
http://www.peplink.com
Important Note
-236 / 261 -
Copyright © 2015 Peplink
Advertisement
Table of Contents
