USER MANUAL
Peplink Balance Series
Appendix A. Restoration of Factory Defaults
To restore the factory default settings on a Peplink Balance unit, perform the following:
For Balance 20/30/30 LTE/50/210/310:
1.
Locate the reset button on the Peplink Balance unit.
2.
With a paper clip, press and keep the reset button pressed for at least 10
seconds, until the unit reboots itself.
For Balance 305/380/580/710/1350/2500/MediaFast 200 and 500:
Use the buttons on front panel to control the LCD menu to go to
Maintenance>Factory Defaults, and then choose Yes to confirm.
Afterwards, the factory default settings will be restored.
All user settings will be lost after restoring the factory default settings. Regular backup of configuration
parameters is strongly recommended.
http://www.peplink.com
Important Note
-233 / 258 -
Copyright © 2015 Peplink