Email Notification - peplink ONE 20 User Manual

USER MANUAL
Peplink Balance Series

24.4 Email Notification

The email notification functionality of the Peplink Balance provides a system
administrator with up-to-date information on network status. The settings for configuring
email notification are found atSystem>Email Notification.
This setting specifies whether or not to enable email notification.If Enable is checked, the
Email
Peplink Balance will sendemail messages to system administrators when the WAN status
Notification
changesor when new firmware is available.If Enable is not checked, email notification is
disabled and the Peplink Balance will not send email messages.
This setting specifies the SMTP server to be used for sending email. If the server requires
SMTP Server
authentication, check Require authentication.
Check the box to enable SMTPS. When the box is checked, SMTP Port will be changed to
SSL Encryption
465 automatically.
This field is for specifying the SMTP port number. By default, this is set to 25; when SSL
SMTP Port
Encryption is checked, the default port number will be set to 465. You may customize the
port number by editing this field. Click Default to restore the number to its default setting.
SMTP User
This setting specifies the SMTP username and password while sending email. These
Name /
options are shown only ifRequire authentication is checked in the SMTP Server setting.
Password
Confirm SMTP
This field allows you to verify and confirm the new administrator password.
Password
Sender's Email
This setting specifies the email address which the Peplink Balance will use to send its
Address
reports.
Recipient's
This setting specifies the email address(es) to which the Peplink Balance will send email
http://www.peplink.com
Email Notification Settings
-209 / 258 - Copyright © 2015 Peplink