Email Notification - peplink Balance One User Manual

USER MANUAL
Peplink Balance Series

23.4 Email Notification

The Email Notification functionality of Peplink Balance provides a System Administrator with up to date
information on network status.
The settings for configuring Email Notification are found at: System> Email Notification
This setting specifies whether or not to enable Email Notification.
If the box Enable is checked, then the Peplink Balance will sendemail messages to
theSystem Administrators when the WAN status changes, or when new firmware is
Email Notification
available.
If the box Enable is not checked, Email Notification is disabled and the Peplink Balance will
not send email messages.
This setting specifies the SMTP server to be used for sending email. If the Server requires
SMTP Server
authentication, check the box Require authentication.
Check the box to enable SMTPS. When the box is checked, the next field SMTP Port will
SSL Encryption
be changed to 465 automatically.
This field is for specifying the SMTP Port number.
By default, this is set to 25; when the SSL Encryption box is checked, the default port
SMTP Port
number will be set to 465.
You may customize the port number by editing this field. Click the button Default to restore
the number to its default setting.
This setting specifies the SMTP username and password while sending email. These
SMTP User Name /
options are shown only if the Require authentication check box is checked in the SMTP
Password
Server setting.
http://www.peplink.com
Email Notification Settings
-183 / 227 - Copyright © 2014 Peplink