USER MANUAL
Peplink Balance Series
21 OSPF& RIPv2
The Balance Router supports OSPF and RIPv2 dynamic routing protocols. Click the Network tab from
the top bar, and then click the OSPF& RIPv2 item on the side bar to reach the following menu:
This field determines the ID of the router. By default, this is specified as the LAN IP
Router ID
address. If you want to specify your own ID, enter it in the Custom field.
This is an overview of the OSPFv2 areas you have defined. Click on the area name to
Area
configure it. To set a new area, click Add. To delete an existing area, click
http://www.peplink.com
OSPF
-173 / 258 -
Copyright © 2015 Peplink
.