Routing Protocols; Ospf & Ripv2 - peplink Pepwave MAX 700 User Manual

20 Routing Protocols

20.1 OSPF & RIPv2
The Pepwave
Click the Advanced tab from the top bar, and then click the Routing Protocols > OSPF &
RIPv2 item on the sidebar to reach the following menu:
Router ID
Area
https://www.peplink.com
supports OSPF and
This field determines the ID of the router. By default, this is specified as the LAN IP
address. If you want to specify your own ID, enter it in the Custom field.
This is an overview of the OSPFv2 areas you have defined. Click on the area name
to configure it. To set a new area, click Add. To delete an existing area, click
RIPv2 dynamic
OSPF
186
routing protocols.
.
Copyright @ 2021 Pepwave