Basic Configuration; Connecting To The Web Admin Interface - peplink Balance One User Manual
Balancemulti-wan
bondingrouters
For more information, please visit peplink.com
Hide thumbs
Also See for Balance One:
- User manual (261 pages) ,
- Manual (2 pages) ,
- User manual (213 pages)
Table of Contents
Advertisement
USER MANUAL
Peplink Balance Series
Basic Configuration
8
Connecting to the Web Admin Interface
8.1
1.
Start a Web browser on a computer that is connected with the Peplink Balance through the LAN.
2.
To connect to the Web Adminof thePeplink Balance, enter the following LAN IP address in the
address field of the web browser:
http://192.168.1.1
(This is the default LAN IP address of the Peplink Balance.)
3.
Enter the following to access the Web
Admin Interface.
User Name: admin
Password: admin
(This is the default Admin User login of
the Peplink Balance. The Admin and
Read-only User Password can be
changed atSystem > Admin Security.)
4.
After successful login, the Dashboard of the Web Admin Interfacewill be displayed. It looks
similar to the following:
The Save button causes the changes to be saved. Configuration changes (e.g., WAN, LAN, admin settings, etc.)
take effect after clicking the Apply Changes button on each page's top right corner.
http://www.peplink.com
Important Note
-55 / 227 -
Copyright © 2014 Peplink
Advertisement
Table of Contents
