Inbound Traffic Management; Outbound Policy; Ap Controller; Qos - peplink ONE 20 User Manual

USER MANUAL
Peplink Balance Series
Layer 2 bridging

Layer 2 Peer Isolation

TM
SpeedFusion

Built-in L2TP / PPTP VPN server

Authenticate L2TP / PPTP clients using RADIUS and LDAP servers

Multi-Site PepVPN Profile

IPsec VPN for network-to-network connections (works with Cisco and Juniper

only)
L2TP / PPTP and IPsec passthrough


Inbound Traffic Management

4.5
TCP/UDP traffic redirection to dedicated LAN server(s)

Inbound link load balancing by means of DNS


Outbound Policy

4.6
Link load distribution per TCP/UDP service

Persistent routing for specified source and/or destination IP addresses per

TCP/UDP service
Prioritize and route traffic to VPN tunnels with Priority and Enforced algorithms

Time-based scheduling


AP Controller

4.7
 Configure and manage Pepwave AP devices
 Review the status of connected AP

QoS

4.8
Quality of service for different applications and custom protocols

User group classification for different service levels

Bandwidth usage control and monitoring on group- and user-level

Application prioritization for custom protocols and DSL optimization

http://www.peplink.com
throughput, ping, and traceroute tests
-12 / 269 - Copyright © 2016 Peplink