Ap Controller - peplink Balance One User Manual

USER MANUAL
Peplink Balance Series
22
AP
The AP Controller acts as a centralized controller of Pepwave AP devices. With this feature, users will be able to
customize and manage multiple AP one a single Peplink Balance Interface.
To configure, navigate to the AP tab and the following options will be shown.
Each Balance router can control a limited number of routers without cost. To manage more, a Full Edition license is
required. Please contact our Authorized Reseller or Peplink Sales Team to obtain more information and price
details.

22.1 AP Controller

Clicking on the AP tab will default to this menu. Here, you can view basic AP management options.
The AP Controller for managing Pepwave APs can be enabled by checking this box.
When this option is enabled, the AP Controller will wait for management connections
originating from APs over the LAN on TCP and UDP port 11753. It will also wait for
AP Management
captive portal connections on TCP port 443. An extended DHCP option, CAPWAP
Access Controller addresses (field 138), will be added to the DHCP server. A local DNS
record, AP Controller, will add to the local DNS proxy.
The AP Controller supports remote management of Pepwave APs. When this option is
enabled, the AP Controller will wait for management connections originating from remote
APs over the WAN on TCP and UDP port 11753. It will also wait for captive portal
connections on TCP port 443.
Support Remote
The DHCP server and/or local DNS server of the remote AP's network should be
AP
configured in the DNS Proxy Settings menu under Network > LAN. The procedure is as
follows:
1.
http://www.peplink.com
Special Note
Access Point Controller
Define an extended DHCP option, CAPWAP Access Controller addresses (field
138), in the DHCP server, where the values are the AP Controller's public IP
addresses; and/or
-160 / 227 - Copyright © 2014 Peplink