USER MANUAL
Peplink Balance Series
16.2 Definition of Servers on LAN
The settings to configure servers on the LAN are located at Network>Inbound
Access>Servers.
Inbound connections from the Internet will be forwarded to the specified Inbound IP
address(es) based on the protocol and port number.When more than one server is
defined, requests will be distributed to the servers in the weight ratio specified for each
server.
To define a new server, click Add Server, which displays the following screen:
Enter
a
valid
server
name
and
its corresponding
LAN
IP
address.Upon
clickingSaveafter entering required information, the following screen appears.
To define additional servers, click Add Serverand repeat the above steps.
http://www.peplink.com
-132 / 258 -
Copyright © 2015 Peplink