Product Features; Supported Network Features; Wan; Lan - peplink balance ONE User Manual

USER MANUAL
Peplink Balance Series
4

Product Features

Peplink Balance Series products enable all LAN users to share broadband Internet
connections and provide advanced features to enhance Internet access. The following
is a list of supported features:
4.1

Supported Network Features

4.2

WAN

Multiple public IP support (DHCP, PPPoE, static IP address)

Static IP support for PPPoE

10/100/1000Mbps Ethernet connection in full/half duplex

Built-in HSPA and EVDO cellular modems

USB mobile connection (only one USB modem can be connected at a time)

Drop-in mode on selectable WAN port with MAC address passthrough network

address translation (NAT) / port address translation (PAT)
Inbound and outbound NAT mapping

Multiple static IP addresses per WAN connection

MAC address clone

Customizable MTU and MSS values

WAN connection health check

Dynamic DNS (supported service providers: changeip.com, dyndns.org, no-

ip.org,tzo.com, and DNS-O-Matic)
Ping, DNS lookup, and HTTP-based health check

4.3

LAN

DHCP server on LAN

Extended DHCP option support

Static routing rules

Local DNS proxy server

VLAN on LAN support

4.4

VPN

Secure SpeedFusion

SpeedFusion performance analyzer

X.509 certificate support (feature activation required on some Balance

models)
Bandwidth bonding and failover among selected WAN connections

Ability to route traffic to a remote VPN peer

Optional pre-shared key setting

http://www.peplink.com
TM
-19 / 261 - Copyright © 2015 Peplink