USER MANUAL
Peplink Balance Series
17.2 Custom Rules for Outbound Policy
Click
in the Outbound Policy form. Choose Custom and press the Save button.
The following screen will then be displayed:
The bottom-most rule is Default. Edit this rule to change the device's default manner of
controlling outbound traffic for all connections that do not match any of the rules above
it. Under the Service heading, Default to change these settings. To rearrange the
priority of outbound rules, drag and drop them into the desired sequence.
By default, Auto is selected for as the Default Rule. You can select Custom to change
the algorithm to be used. Please refer to the upcoming sections for the details on the
available algorithms.
To create a custom rule, click Add Rule at the bottom of the table. The following
window will be displayed:
http://www.peplink.com
-131 / 269 -
Copyright © 2016 Peplink