USER MANUAL
Peplink Balance Series
Custom Rules for Outbound Policy
14.2
Click
in the Outbound Policy form.Choose Custom and press the Savebutton.The followingscreen
will then be displayed:
The bottom-most rule is Default. Edit this rule to change the device's default manner ofcontrolling
outbound traffic for all connections that donot match any of the rules above it. Under the Service he––
ading,Defaultto change thesesettings. To rearrange the priority of outbound rules, drag and drop them
into the desired sequence.
By default, Auto is selected for as theDefault Rule.You can select Custom to change the algorithm to be
used. Please refer to the upcoming sections for the details onthe available algorithms.
To create a custom rule, click Add Rule at the bottom of the table.The following window will be displayed:
http://www.peplink.com
-104 / 227 -
Copyright © 2014 Peplink