Call Control Settings - Panasonic KX-TGP700 Administrator's Manual

Value Range
Default Value
BELL_CORE_PATTERN5_TIMING
Value Format
Description
Value Range
Default Value
KEY_PAD_TONE_HSy
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
Value Format
Description
Value Range
Default Value

4.35 Call Control Settings

OUTGOING_CALL_LINE_HSy
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
Value Format
Description
Value Range
Default Value
Document Version: 2020-04
0–5000 (msec) (0: Continuous)
Note
•
Avoid setting 1–50 for any of the values.
300,200,1000,200,300,4000
Comma-separated Integer
Specifies the cadence, in milliseconds, of pattern ID 5, described in
the LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section
14, using up to 8 whole numbers (on 1, off 1, on 2, off 2...) separated
by commas.
0–5000 (msec) (0: Continuous)
Note
•
Avoid setting 1–50 for any of the values.
500
INTEGER
Specifies whether a tone is heard in response to key presses.
•
0: Off
•
1: On
1
Comma-separated Integer
Specifies which lines (1–16) can be seized when going off-hook to
make a call for each handset, using 16 whole numbers (0 or 1)
separated by commas.
This setting is available only when "MULTI_NUMBER_ENABLE" is
set to enable.
•
0: Disable
•
1: Enable
The format must be "x,x,x,x,x,x,x,x,x,x,x,x,x,x,x,x" (x: line numbers
1 to 16 starting from the left).
1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
4.35 Call Control Settings
Administrator Guide 333