EX-10
Ultra-slim Photoelectric Sensor
Smallest body, just 3.5 mm
0.138 in
It can be mounted in a very small space
as its size is just W10
H14.5
W0.394
H0.571
D0.138 in
beam, front sensing type).
Bright 2-color indicator
A convenient 2-color indicator has
been incorporated in the miniature
body.
2-color indicator
(
Red: Operation indicator
)
Green: Stability indicator
Ten times durable
Flexible cable on EX-10-R is 10 times
as durable as conventional model. It is
most suitable for moving parts, such as
robot arm, etc.
226
SERIES
thick
High-speed response time: 0.5 ms
The sensor is suitable for detecting
D3.5 mm
small and high-speed traveling objects.
(thru-
Waterproof
The sensor can be hosed down
because of its IP67 construction and
the non-corrosive stainless steel
mounting bracket.
Note: However, take care that if it is exposed to
water splashes during operation, it may
detect a water drop itself.
Red beam makes beam alignment easy
The red LED beam projected from the
emitter helps you to align the sensor
heads.
Amplifier built-in
extraordinarily small
and slim size
Flexible mounting
The diffuse reflective type sensor is
front sensing and is so thin that it gives
an impression of being just pasted on
the mounting base. The thru-beam
type is available as front sensing type,
as well as, side sensing type, allowing
flexible mounting.
Thru-beam
Operation mode switch
Thru-beam type sensor incorporated
with an operation mode switch on the
bifurcation is also available. It helps
you to test the operability before start-
up.
Operation mode switch
08/2005
Amplifier Built-in
UL Recognition
Conforming to EMC Directive
(Excluding 5 m cable length type)
(Excluding EX-15 /17 )
Diffuse reflective
Front sensing type
Front sensing type
Side sensing type
Even for the thru-beam
type sensor, only three
Operation indicator
SE NS
SE NS
SE NS
SE NS
.
.
.
.
wires have to be con-
EX EX
EX EX
-17
-17
-17
-17
(Orange)
nected.