Notice
•
After resetting the settings, the unit will restart even if it is being accessed through the phone user
interface, or on calls.
Note
•
You can specify carrier default using configuration parameter extensions. Those parameters will be
reset to the specified carrier default values (see Parameter Extensions).
3.7.7 Restart
This screen allows you to restart the unit by clicking [Restart] or [Restart (Graceful)]. After you click this
button, a dialog box is displayed, asking whether you want to restart the unit. Click OK to perform a restart,
or Cancel not to.
3.7.7.1 Restart
Notice
•
The unit will restart even if it is being accessed through the phone user interface, or on calls.
3.7.7.2 Restart (Graceful)
Notice
•
The unit will not restart if it is being accessed through the phone user interface, or on calls. If it is
busy, phone waits to become idle then restarts.
3.7.8 DECT Monitoring
This screen displays the results of DECT monitoring when DECT monitoring is executed.
Document Version: 2020-04
3.7.7 Restart
Administrator Guide
155