Panasonic KX-TGP700 Administrator's Manual page 203

NW_TEST_TIMER
Value Format
Description
Value Range
Default Value
DHCPCD_RECOVERY_TIME
Value Format
Description
Value Range
Default Value
DHCP_OPTION100_ENABLE
Value Format
Description
Value Range
Default Value
Document Version: 2020-04
BOOLEAN
Specifies the length of time, in seconds, for a PING network test
timeout.
1–10
5
INTEGER
Specifies the time, in seconds, for DHCP recovery. When this
parameter is set to "0", the recovery process is not performed.
0, 30–3600
0
BOOLEAN
Specifies whether to use DHCP option 100 to get the settings for
Time Zone and Daylight Saving Time.
•
Y: Enable
•
N: Disable
Note
•
If "Y" is specified, the settings for Time Zone and Daylight
Saving Time are retrieved as IEEE 1003.1 POSIX.
•
If "Y" is specified, the following settings are disabled.
–
Phone User Interface: Menu - System Settings - System
Settings - Time Zone
–
Web User Interface: System - Time Adjust Settings -
TimeZone
Web User Interface: System - Time Adjust Settings -
Daylight Saving Time
Web User Interface: System - Time Adjust Settings - Start
Day and Time of DST
Web User Interface: System - Time Adjust Settings - End
Day and Time of DST
–
Configuration File Parameter: TIME_ZONE, DST_ENABLE,
DST_OFFSET, DST_START_MONTH,
DST_START_ORDINAL_DAY, DST_START_TIME,
DST_START_DAY_OF_WEEK, DST_STOP_MONTH,
DST_STOP_TIME, DST_STOP_ORDINAL_DAY,
DST_STOP_ DAY_OF_WEEK.
N
4.5 Basic Network Settings
Administrator Guide 203