Panasonic KX-TGP700 Administrator's Manual page 216

4.10 HTTP Settings
Value Range
Default Value
Web User Interface Reference
HTTP_USER_AGENT
Value Format
Description
Value Range
Default Value
Web User Interface Reference
HTTP_AUTH_ID
Value Format
Description
Value Range
Default Value
Web User Interface Reference
HTTP_AUTH_PASS
Value Format
Description
Value Range
Default Value
Web User Interface Reference
216 Administrator Guide
•
1: Use HTTP/1.0
•
0: Use HTTP/1.1
Note
•
For this unit, it is strongly recommended that you specify "1" for
this setting. However, if the HTTP server does not function well
with HTTP/1.0, try changing the setting "0".
0
HTTP Version
STRING
Specifies the text string to send as the user agent in the header of
HTTP requests.
Max. 64 characters
Note
•
If "{mac}" is included in this parameter, it will be replaced with
the unit's MAC address in lower-case.
•
If "{MAC}" is included in this parameter, it will be replaced with
the unit's MAC address in upper-case.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit's model name.
•
If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Panasonic_{MODEL}/{fwver} ({mac})
HTTP User Agent
STRING
Specifies the authentication ID required to access the HTTP server.
Max. 128 characters
Empty string
Authentication ID
STRING
Specifies the authentication password required to access the HTTP
server.
Max. 128 characters
Empty string
Authentication Password
Document Version: 2020-04