Panasonic KX-TGP700 Administrator's Manual page 223

ANNEX_G_STUN_PASS
Value Format
Description
Value Range
Default Value
ANNEX_G_STUN_MAX_KEEP_ALIVE
Value Format
Description
Value Range
Default Value
ANNEX_G_STUN_MIN_KEEP_ALIVE
Value Format
Description
Value Range
Default Value
UDP_CON_REQ_ADDR_NOTIFY_LIMIT
Value Format
Description
Value Range
Default Value
Document Version: 2020-04
STRING
Specifies the STUN password to be used in computing the
MESSAGE-INTEGRITY attribute used in Binding Requests (only if
message integrity has been requested by the STUN server). When
read, this parameter returns an empty string, regardless of the actual
value.
Max. 256 characters (except ", &, ', :, <, >, and space)
Empty string
INTEGER
Specifies the maximum period, in seconds, that STUN Binding
Requests must be sent by the CPE for the purpose of maintaining the
binding in the Gateway. This applies specifically to Binding Requests
sent from the UDP Connection Request address and port.
Note
•
This setting is available only when "ANNEX_G_STUN_ENABLE"
is set to "Y".
1–3600
300
INTEGER
Specifies the minimum period, in seconds, that STUN Binding
Requests can be sent by the CPE for the purpose of maintaining the
binding in the Gateway. This limit applies only to Binding Requests
sent from the UDP Connection Request address and port, and only
those that do not contain the BINDING-CHANGE attribute.
Note
•
This setting is available only when "ANNEX_G_STUN_ENABLE"
is set to "Y".
1–3600
30
INTEGER
Specifies the minimum time, in seconds, between Active Notifications
resulting from changes to the "UDPConnectionRequestAddress" (if
Active Notification is enabled).
0–65535
0
4.12 TR-069 Settings
Administrator Guide 223