3.6.3 Call Control [Line 1]–[Line 16]
Value Range
Default Value
Configuration File Reference
Enable Key Synchronization
Description
Value Range
Default Value
Configuration File Reference
Enable Call Park Notification
Description
Value Range
Default Value
Configuration File Reference
Enable Click to Call
Description
Value Range
Default Value
Configuration File Reference
MoH Server URI
Description
Value Range
Default Value
138
Administrator Guide
•
Yes
•
No
Note
•
If you select [Yes], the SIP server will control the line by using
a shared-call signaling method. If you select [No], the SIP
server will control the line by using a standard signaling
method.
No
SHARED_CALL_ENABLE_n
Selects whether to synchronize the Do Not Disturb and Call Forward
settings.
Note
•
Even if you select [Yes], this feature may not function properly
if your phone system does not support it. Before you configure
this setting, consult your phone system dealer/service provider.
•
Yes
•
No
No
FWD_DND_SYNCHRO_ENABLE_n
Selects whether to respond to call park notifications from the server.
•
Yes
•
No
No
CALLPARK_NOTIFICATION_ENABLE_n
Selects whether to enable Click to Dial/Answer/Hold functions.
•
Yes
•
No
No
CLICKTO_ENABLE_n
Specifies MoH server URI for each line.
Max. 384 characters
Not stored.
Document Version: 2020-04