4.24 SIP Settings
Description
Value Range
Default Value
SIP_ADD_DIVERSION_n
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
Value Format
Description
Value Range
Default Value
TRANSFER_RECALL_TIM
Value Format
Description
Value Range
Default Value
SIGNAL_COMPRESSION_n
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
Value Format
Description
Value Range
Default Value
MAX_BREADTH_n
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
Value Format
Description
278
Administrator Guide
Specifies whether to add the attribute "transport=udp" to the SIP
header URI.
•
Y: Add Transport UDP
•
N: Do not add Transport UDP
N
INTEGER
Specifies whether to add Diversion header information.
0–2
–
0: Do not add Diversion header information
–
1: Use own diversion information only for the Diversion header
–
2: Add diversion information to existing Diversion header
0
INTEGER
Specifies the time, in seconds, in which a transferred call will recall
when the SIP sever does not reply to SIP REFER message.
0, 1–240
0
INTEGER
Specifies whether to use signal compression. When using signal
compression, select Required or Supported.
•
0: Disable
•
1: Enable (Required)
•
2: Enable (Supported)
0
INTEGER
Specifies the Max Breadth that is max Folk number at Proxy.
Document Version: 2020-04