Panasonic KX-TGP700 Administrator's Manual page 338

4.35 Call Control Settings
Value Range
Default Value
Web User Interface Reference
MACRODIGIT_TIM
Value Format
Description
Value Range
Default Value
Web User Interface Reference
INTERNATIONAL_ACCESS_CODE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
COUNTRY_CALLING_CODE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
338 Administrator Guide
•
Y: Enable dial plan filtering
•
N: Disable dial plan filtering
Note
•
If set to "Y", the dialed number will not be sent to the line when
the number dialed by the user does not match any of the dial
formats specified in the dial plan.
•
If set to "N", the dialed number will be sent to the line, even if
the number dialed by the user does not match any of the dial
formats specified in the dial plan.
N
Call Even If Dial Plan Does Not Match
INTEGER
Specifies the length of time, in seconds, that the unit waits when a "T"
or "t" has been entered in the dial plan.
1–15
5
Timer for Dial Plan
STRING
Specifies the number to be shown in the place of the first "+" symbol
when the phone number for incoming international calls contains "+".
Max. 8 characters (consisting of 0–9, *, and #)
Note
•
No other characters are allowed.
Empty string
International Call Prefix
STRING
Specifies the country/area calling code to be used for comparative
purposes when dialing a number from the incoming call log that
contains a "+" symbol.
Max. 8 characters (consisting of 0–9)
Empty string
Country Calling Code
Document Version: 2020-04