4.29 SRTP Settings
Value Range
Default Value
RTP_CLOSE_ENABLE_n
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
Value Format
Description
Value Range
Default Value
RTCPXR_ENABLE_n
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
Value Format
Description
Value Range
Default Value
Web User Interface Reference
4.29 SRTP Settings
SRTP_CONNECT_MODE_n
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
Value Format
Description
298
Administrator Guide
0–1
–
0: Send RTCP signals using the value specified in
"RTCP_INTVL_n", if the "RTCP_ENABLE_n" parameter is enabled.
–
1: Send RTCP signals using the value specified in the SDP
attribute "a=rtcp:".
0
BOOLEAN
Specifies whether to enable processing to close held RTP sockets.
•
Y: Enable RTP Close
•
N: Disable RTP Close
N
BOOLEAN
Specifies whether to enable or disable RTCP-XR.
•
Y: Enable RTCP-XR
•
N: Disable
N
Enable RTCP-XR
INTEGER
Specifies the mode of SRTP feature.
Document Version: 2020-04