Panasonic KX-TGP700 Administrator's Manual page 280

4.24 SIP Settings
Value Range
Default Value
Web User Interface Reference
SIP_HOLD_ATTRIBUTE_n
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
Value Format
Description
Value Range
Default Value
SDP_USER_ID_n
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
Value Format
Description
Value Range
Default Value
TELEVENT_PAYLOAD
Value Format
Description
Value Range
Default Value
Web User Interface Reference
HOLD_SOUND_PATH_n
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
280 Administrator Guide
•
Y: Enable RFC 2543 Call Hold
•
N: Disable RFC 2543 Call Hold
Note
•
If set to "Y", the "c=0.0.0.0" syntax will be set in SDP when
sending a re-INVITE message to hold the call.
•
If set to "N", the "c=x.x.x.x" syntax will be set in SDP.
Y
Enable c=0.0.0.0 Hold (RFC 2543)
INTEGER
Specifies whether to set "a=inactive " or not when the call is on hold.
•
0: send only
•
1: inactive
0
STRING
Specifies the user ID used in the "o=" line field of SDP.
Max. 32 characters
Empty string
INTEGER
Specifies the RFC 2833 payload type for DTMF tones.
Note
•
This setting is available only when "DTMF_METHOD_n" is set to
"0".
96–127
101
Telephone-event Payload Type
Document Version: 2020-04