Telephone - Panasonic KX-TGP700 Administrator's Manual

3.6 Telephone

Value Range
Default Value
Configuration File Reference
Enable Mixed SRTP & RTP by Conference
Description
Value Range
Default Value
Configuration File Reference
Enable Mixed SRTP & RTP by Transfer
Description
Value Range
Default Value
Configuration File Reference
3.6 Telephone
This section provides detailed descriptions about all the settings classified under the [Telephone] tab.
128 Administrator Guide
•
0: SRTP
•
1: RTP/SRTP
•
2: Panasonic Original
•
3: SRTP/RTP
Note
•
0: SRTP
Use only SRTP for outgoing and incoming calls.
•
1: RTP/SRTP
Use only RTP for outgoing calls, and RTP or SRTP for
incoming calls.
•
2: Panasonic Original
Use RTP or SRTP for both outgoing and incoming calls.
This value is valid only when the unit is connected to a
Panasonic PBX.
"SRTP_MIX_TRANSFER_ENABLE_n" must also be set to "Y".
•
3: SRTP/RTP
If you are using "RTP/AVP" and append "a=crypto", and the
response message includes "a=crypto", the conversation will
be established with SRTP. If "a=crypto" is not included, the
conversation will be established with RTP.
1: RTP/SRTP
SRTP_CONNECT_MODE_n
Selects whether to allow conferences where each participant can use
either SRTP or RTP.
•
Yes
•
No
No
SRTP_MIX_CONFERENCE_ENABLE_n
Selects whether to allow call transfers between a user who is using
SRTP and a user who is using RTP.
•
Yes
•
No
No
SRTP_MIX_TRANSFER_ENABLE_n
Document Version: 2020-04