3.3.3.1 HTTP Client
HTTP Version
Description
Value Range
Default Value
Configuration File Reference
HTTP User Agent
Description
Value Range
Default Value
Configuration File Reference
Authentication ID
Description
Document Version: 2020-04
Selects which version of the HTTP protocol to use for HTTP
communication.
•
HTTP/1.0
•
HTTP/1.1
HTTP/1.1
HTTP_VER
Specifies the text string to send as the user agent in the header of
HTTP requests.
Max. 64 characters
Note
•
If "{mac}" is included in this parameter, it will be replaced with
the unit's MAC address in lower-case.
•
If "{MAC}" is included in this parameter, it will be replaced with
the unit's MAC address in upper-case.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit's model name.
•
If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Panasonic_{MODEL}/{fwver} ({mac})
HTTP_USER_AGENT
Specifies the ID for the User account. If set, this name must be
entered to access the Web user interface at the User access level.
3.3.3 HTTP Client Settings
Administrator Guide
73