3.4.2 Language Settings
Value Range
Default Value
Configuration File Reference
Enable Non-Registering SIP UA
Description
Value Range
Default Value
Configuration File Reference
Send RTP on Call Hold
Description
Value Range
Default Value
Configuration File Reference
3.4.2 Language Settings
This screen allows you to select the language used for the Web user interface. The language setting is only
applicable when you log in to the Web user interface as User.
Note
•
If you change the language while logged in to the Web user interface with the User account, the
language will be changed after the message "Complete" is displayed. If you are logged in with the
Administrator account, the language will be changed when a user logs in to the Web user interface as
User.
92
Administrator Guide
•
Yes
•
No
Note
If "Yes" is specified, the settings for Line 2 to Line 8 of the
following items are disabled.
•
"Local SIP Port" in Web User Interface Programming
•
"SIP_SRC_PORT" in Configuration File Programming
The settings will be the same as Line 1.
No
SIP_TRUNK_MODE_ENABLE
Specifies whether to enable or disable SIP UA registration.
Note
•
This setting is available only when [Enable SIP Trunk
Service] is set to [Yes].
•
Yes (Enable to work without registering SIP)
•
No
No
SIP_NON_REGISTER_ENABLE
Specifies whether to enable or disable the continuous sending of RTP
packets while a call is on hold.
Note
•
This setting is available only when [Enable SIP Trunk
Service] is set to [Yes].
•
Yes
•
No
No
RTP_KEEP_ENABLE
Document Version: 2020-04