Rtp/Rtcp/Rtcp-Xr Settings - Panasonic KX-TGP700 Administrator's Manual

DTMF_INTDIGIT_TIM
Value Format
Description
Value Range
Default Value

4.28 RTP/RTCP/RTCP-XR Settings

DSCP_RTP_n
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
Value Format
Description
Value Range
Default Value
Web User Interface Reference
DSCP_RTCP_n
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
Value Format
Description
Value Range
Default Value
Web User Interface Reference
MAX_DELAY_n
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
Value Format
Description
Value Range
Default Value
Document Version: 2020-04
INTEGER
Specifies the interval, in milliseconds, between DTMF signals.
60–200
90
INTEGER
Specifies the DSCP level of DiffServ applied to RTP packets.
0–63
0
RTP Packet QoS (DSCP)
INTEGER
Specifies the DSCP level of DiffServ applied to RTCP/RTCP-XR
packets.
0–63
0
RTCP Packet QoS (DSCP)
INTEGER
Specifies the maximum delay, in 10-millisecond units, of the jitter
buffer.
3–50 (× 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than "NOM_DELAY"
–
This value must be greater than "MIN_DELAY"
20
4.28 RTP/RTCP/RTCP-XR Settings
Administrator Guide 295