Description
Value Range
Default Value
RINGBACK_TONE_TIMING
Value Format
Description
Value Range
Default Value
Web User Interface Reference
CW_TONE1_FRQ
Value Format
Description
Value Range
Default Value
HOLD_TONE_FRQ
Value Format
Description
Value Range
Default Value
HOLD_TONE_GAIN
Value Format
Description
Value Range
Default Value
Document Version: 2020-04
Specifies whether the ringback tone is repeated.
0–1
–
0: No Repeat
–
1: Repeat
1
Comma-separated Integer
Specifies the pattern, in milliseconds, of ringback tones using up to
10 whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
0–16000 (msec) (0: Continuous)
Note
•
Avoid setting 1–50 for any of the values.
60,2000,3940
Tone Timings
INTEGER
Specifies the frequency, in hertz, of call waiting tone 1.
0 (0: No tone)
220,233,247,262,277,294,311,330,349,370,392,415,440,466,494,
523,554,587,622,659,698,740,784,831,880,932,988,1047,1109,
1175,1245,1319,1397,1480,1568,1661,1760,1865,1976 (Hz)
392
Comma-separated Integer
Specifies the dual-tone frequencies, in hertz, of the hold tone using 2
whole numbers separated by a comma.
0, 200–2000 (Hz) (0: No tone)
425
INTEGER
Specifies the gain, in decibels, of the hold tone.
-24–24 (dB)
0
4.34 Tone Settings
Administrator Guide
331