Panasonic KX-TGP700 Administrator's Manual page 120

3.5.2 SIP Settings [Line 1]–[Line 16]
Default Value
Configuration File Reference
Enable 100rel (RFC 3262)
Description
Value Range
Default Value
Configuration File Reference
Enable SSAF (SIP Source Address Filter)
Description
Value Range
Default Value
Configuration File Reference
Enable c=0.0.0.0 Hold (RFC 2543)
Description
Value Range
Default Value
Configuration File Reference
Transport Protocol
Description
120 Administrator Guide
INVITE
SIP_SESSION_METHOD_n
Specifies whether to add the option tag 100rel to the "Supported"
header of the INVITE message.
•
Yes
•
No
Note
•
If you select [Yes], the Reliability of Provisional Responses
function will be enabled. The option tag 100rel will be added to
the "Supported" header of the INVITE message and to the
"Require" header of the "1xx" provisional message. If you
select [No], the option tag 100rel will not be used.
Yes
SIP_100REL_ENABLE_n
Selects whether to enable SSAF for the SIP servers (registrar server,
proxy server, and presence server).
•
Yes
•
No
Yes
SIP_DETECT_SSAF_n
Selects whether to enable the RFC 2543 Call Hold feature on this
line.
•
Yes
•
No
Note
•
If you select [Yes], the "c=0.0.0.0" syntax will be set in SDP
when sending a re-INVITE message to hold the call. If you
select [No], the "c=x.x.x.x" syntax will be set in SDP.
Yes
RFC2543_HOLD_ENABLE_n
Selects which transport layer protocol to use for sending SIP packets.
Document Version: 2020-04