Panasonic KX-TGP700 Administrator's Manual page 288

4.24 SIP Settings
Value Range
Default Value
SIP_TRANSPORT_NAPTR_ENABLE_n
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
Value Format
Description
Value Range
Default Value
SRTP_CONNECT_MODE_NAPTR_ENABLE_n
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
Value Format
Description
Value Range
Default Value
288 Administrator Guide
•
Y: Enable
•
N: Disable
Note
•
This setting is available only when
"SIP_DNSSRV_ENA_NAPTR_n" is set to "Y".
N
BOOLEAN
Specifies whether the protocol for SIP (UDT, TCP, or TLS) can be
selected by the NAPTR response.
At the same time, this setting specifies whether the secure protocol
for SIP (SIPS or TLS) can be selected by the NAPTR response.
•
Y: Enable
•
N: Disable
Note
If "Y" is specified, the following settings will be invalidated.
–
Web User Interface Programming
Transport Protocol, TLS Mode
–
Configuration File Programming
SIP_TRANSPORT_n, SIP_TLS_MODE_n
N
BOOLEAN
Specifies whether the type of RTP (RTP or SRTP) can be selected by
the NAPTR response.
•
Y: Enable
•
N: Disable
Note
If "Y" is specified, the following settings will be invalidated.
–
Web User Interface Programming
SRTP Mode
–
Configuration File Programming
SRTP_CONNECT_MODE_n
N
Document Version: 2020-04