4.26 CODEC Settings
4.26 CODEC Settings
CODEC_G729_PARAM_n
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
Value Format
Description
Value Range
Default Value
CODEC_ENABLEx_n
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".
Value Format
Description
Value Range
Default Value
Web User Interface Reference
292
Administrator Guide
INTEGER
Specifies whether to add an attribute line, "a=fmtp:18 annexb=no", to
SDP when the codec is set to "G729A".
•
0: Do not add "a=fmtp:18 annexb=no"
•
1: Add "a=fmtp:18 annexb=no"
0
BOOLEAN
Specifies whether to enable the codec specified in the parameter list.
Note
•
The "x" character in the parameter title should be changed to
one of the following numbers, according to the codec to be
changed.
–
0: G.722
–
1: PCMA
–
2: –
–
3: G.729A
–
4: PCMU
–
5: Opus
•
For codec setting examples, see 2.5.1 Examples of Codec
Settings.
•
Y: Enable
•
N: Disable
Y
•
G.722 Enable
•
PCMA Enable
•
G.729A Enable
•
PCMU Enable
•
Opus Enable
Document Version: 2020-04