Busy Tone; Ringing Tone - Panasonic KX-TGP700 Administrator's Manual

3.6.5 Tone Settings
Value Range
Default Value
Configuration File Reference

3.6.5.2 Busy Tone

Tone Frequencies
Description
Value Range
Default Value
Configuration File Reference
Tone Timings
Description
Value Range
Default Value
Configuration File Reference

3.6.5.3 Ringing Tone

Tone Frequencies
Description
Value Range
Default Value
Configuration File Reference
142 Administrator Guide
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
60,0
DIAL_TONE1_TIMING
Specifies the dual-tone frequencies, in hertz, of busy tones using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
Note
•
If the value for this setting is "480,620", the unit will use a
mixed signal of a 480 Hz tone and a 620 Hz tone.
480,620
BUSY_TONE_FRQ
Specifies the pattern, in milliseconds, of busy tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
60,500,440
BUSY_TONE_TIMING
Specifies the dual-tone frequencies, in hertz, of ringback tones using
2 whole numbers separated by a comma.
0, 200–2000 (0: No tone)
Note
•
If the value for this setting is "440,480", the unit will use a
mixed signal of a 440 Hz tone and a 480 Hz tone.
440,480
RINGBACK_TONE_FRQ
Document Version: 2020-04