Panasonic KX-TGP700 Administrator's Manual page 357

Value Range
Default Value
PRIVACY_LEVEL_n (For KX-TPA68)
For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
4.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
GROUP_CALL_REJECT_MODE
Value Format
Document Version: 2020-04
•
Y: Force dependency
•
N: Do not force dependency
Note
•
If "PRIVACY_MODE_n" is set to "N"
If this setting is set to "Y", the Line Notification function is
enabled for lines where "OUTGOING_CALL_LINE_HSy" is set
to "1".
If this setting is set to "N", the Line Notification function is
enabled regardless of the "OUTGOING_CALL_LINE_HSy"
setting.
•
If "PRIVACY_MODE_n" is set to "Y"
The Line notification functions is disabled, regardless of any
other settings.
N
Comma-separated Integer
Specifies the level of display and key control for the Line Notification
function for each line.
Specify this setting for 16 handsets, regardless of the actual
registration status of the handsets.
For example:
PRIVACY_LEVEL_1=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x,x
(From the left, each x indicates the function level for handsets
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 and 16 respectively.
Function level: 1–3 (Y: enabled, N: disabled)
•
1 = Y,N,N,N,N (only display is enabled)
•
2 = Y,Y,Y,Y,N (all functions except barge-in are enabled)
•
3 = Y,Y,Y,Y,Y (all functions are enabled)
The functions enabled/disabled in each function level correspond,
from the left, to a,b,c,d,e below.
•
a: Display
•
b: Make a call
•
c: Call pickup
•
d: Call hold retrieve
•
e: Barge-in
3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3
INTEGER
4.35 Call Control Settings
Administrator Guide 357