Provisioning; What Is Provisioning; Protocols For Provisioning; Configuration File - Panasonic KX-TGP700 Administrator's Manual

2.2 Provisioning

<user>
<password>
<host>
<port>
<url-path>
<file name>
1.
Case 1: Protocol, server name, and file name
http://[2001:0db8:bd05:01d2:288a:1fc0:0001:10ee]/{MODEL}.cfg
http://prov.com/{MODEL}.cfg
2.
Case 2: Protocol, server name, path and file name
http://[2001:db8::1234:0:0:9abc]/pana/{MODEL}.cfg
http://prov.com/pana/{MODEL}.cfg
3.
Case 3: Protocol, user name, password, server name and file name
http://id:pass@[2001:db8::9abc]/{MAC}.cfg
http://id:pass@prov.com/{MAC}.cfg
2.2 Provisioning

2.2.1 What is Provisioning?

After pre-provisioning has been performed (→ see 2.1 Pre-provisioning), you can set up the unit
automatically by downloading the configuration file stored on the provisioning server into the unit. This is
called "provisioning".

2.2.2 Protocols for Provisioning

Provisioning can be performed over HTTP, HTTPS, FTP, and TFTP. The protocol you should use differs
depending on how you will perform provisioning. Normally, HTTP, HTTPS, or FTP is used for provisioning. If
you are transmitting encrypted configuration files, it is recommended that you use HTTP. If you are
transmitting unencrypted configuration files, it is recommended that you use HTTPS. You may not be able to
use FTP depending on the conditions of the network router or the network to be used.

2.2.3 Configuration File

This section gives concrete examples of the functions of the configuration file and how to manage it.
The configuration file is a text file that contains the various settings that are necessary for operating the unit.
The files are normally stored on a server maintained by your phone system dealer/service provider, and will
be downloaded to the units as required. All configurable settings can be specified in the configuration file.
You can ignore settings that already have the desired values. Only change parameters as necessary.
For details about setting parameters and their descriptions, see 4 Configuration File Programming.
Using 3 Types of Configuration Files
The unit can download up to 3 configuration files. One way to take advantage of this is by classifying the
configuration files into the following 3 types:
30 Administrator Guide
Optional User name
Optional Password
Mandatory IP Address or Domain
Optional Port number
Optional Full path of the resource
Mandatory File name
Document Version: 2020-04