Advertisement
2.2 Embedded type
Preparation: Make 2 holes for screws using a Phillips-head screwdriver.
3
Mount the top case.
Align the claws of
the top case and
then align the claws
of the bottom case.
Avoid the wire
being caught.
Claw (2 places)
Screw (supplied)
2
Connect the remote control wiring.
Top case
(Back side)
Bottom case (Back side)
AMP Air Conditioning
1
Mount the bottom case to the wall.
Pass the wire through the hole in the
centre of the bottom case.
Claw
Hole for screw
Terminal board
Remove the coating.
Appro . 6 mm
Make sure the wiring connection
is in the correct direction.
EN 11
Settings (For CZ-RTC3)
RC. setting mode (ECONAVI activation for remote controller)
1. Press and hold the 3 buttons for 4 seconds or more simultaneously.
2. Select the item to set. (Select [3. RC. setting mode].)
3. Set. (Select the Code no. and Set data.)
(Repeat)
Code
Set Item
no.
ECONAVI
Set the Set
activation
data to 0001
34
for remote
to activate
controller
ECONAVI.
EN 12
EN
FR
SP
DE
Set data
IT
0000 Inactive (factory setting)
0001 Activate
PT
GK
www.ampair.co.uk | sales@ampair.co.uk
Advertisement
