Sensor Connections And Initial Settings; Mounting Console - Panasonic HL-G1 Series User Manual

4. Sensor Connections and Initial Settings

4-1 Mounting Console

For the installation of the GT Series in detail, refer to "Chapter 3 Installation and
Wiring" of the "GT-series User's Manual".
Use the four mounting brackets and four mounting screws provided and mount the
console to the mounting plate.
GT02 Series
GT12 Series
HL-G1 Series User's Manual (Console-dedicated Version)
(1) Insert the unit into the mounting plate.
(2) Attach the mounting brackets to the grooves of the unit, and slide and fix the
brackets. Tighten the screws and fix the unit to the mounting plate securely.
Note 1) Use a No. 1 Phillips screwdriver.
Note 2) Screw tightening torque of 0.2 to 0.3 N·m
Note 3) Do not tighten the screws in excess, or otherwise the front
panel may deform and the touch switch cannot work
properly. Be sure to keep the above torque range.
Enlarged view
(1) Insert the unit into the mounting plate.
(2) Attach the mounting brackets to the grooves of the unit.
Tighten the screws and fix the unit to the mounting plate securely.
Note 1) Use a No. 1 Phillips screwdriver.
Note 2) Screw tightening torque of 0.2 to 0.3 N·m
Note 3) Do not tighten the screws in excess, or otherwise the front
panel may deform and the touch switch cannot work
properly. Be sure to keep the above torque range.
Enlarged view
Insert the screw to
the end.
15
Phillips screwdriver
Make sure that the
direction of the
screw is correct.
Phillips screwdriver
Make sure that the
direction of the
screw is correct.