Position adjustment of sensor head
STEP3
Check installation
Check
measurement center
Check
measurement range
Install completed
Initialization
STEP4
Save settings
Save settings
STEP5
Save settings
Advanced settings
Check the mounting direction of sensor head. Select the optimum
direction according to the shape or moving direction of measurement
object. Note that a different installation method is used between
specular reflection and diffuse reflection measurement.
"1-3-2 Sensor Head"
Adjust the position of the measuring surface on measurement object to
around the measurement center.
The RANGE indicator lights in yellow after it is correctly positioned.
"1-2-2 Sensor Head"
Move the measurement object to make sure that the displacement
of object is within the measurement range. The RANGE
indicator blinks in yellow when the object is within the
measurement range.
"8-6 Characteristics" – "Output Characteristics and
Measurement Range Indicator"
The compact programmable display displays the measurement
value while the measurement object is within the measurable range.
Cancel the alarm if it does not display the measurement value.
"4-4-1 Alarm Setting and Outputs"
The settings can be initialized at failure in setting.
"4-3-4 System Setting" – "Initialization"
Before turning off the system power, make sure to save the
settings not to delete them.
"4-3-4 System Setting" – "Save"
Up to 16 settings can be saved and loaded as required. They can
be changed from terminals, too.
"Chapter 4 Explanation of Functions"
3-7
Chapter 3 Programmable Display Operation
3