Cam Bracket Disassembly And Inspection; Cam Bracket Reassembly - Toro AC-1 Service Manual

Cam
Bracket
,106
CRANKCASE INSPECTION
& REPAIR (cont.)
Cam Bracket Disassembly and Inspection
1. Disassemble the cam gear, two (2) followers and
bracket
.
2. Inspect the cam gear, bracket, and followers for
wear or damage. Replace any or all of the parts
if necessary.
3. Inspect the teeth on the cam gear. If the teeth are
badly worn, chipped or missing, replace the cam
gear.
-
Cam Bracket Reassembly
1.
Make sure you have all of the necessary parts to
reassemble the cam bracket assembly.
2. Install the cam followers to the cam bracket.
NOTE: Make sure the cam followers are installed
to the end of the bracket with the step on it.
3.
Install the cam gear to the cam followers and
bracket.
4-21