Toro AC-1 Service Manual page 47

DISASSEMBLE ENGINE (cont.)
2. Remove the rocker adjusting nuts, rocker arm
pivots and rocker arms.
3.
Remove the two (2) push rods from the push rod
I
NOTE: Always match intake and exhaust parts when
disassembling the rocker arm assembly.
guides.
4. Remove the four (4) cylinder hex nuts and
washers.
5. Remove the push rod guides from the cylinder
studs.
3-1 6
Adjusting Nut
Arm
Rocker Arm
2.6060.060
2.6047.061