Remove Rocker Arm Assembly - Toro AC-1 Service Manual

DISASSEMBLE ENGINE (cont.)
WARNING: CRACKED OR BROKEN COOLING
FINS ARE A HAZARD! Be careful not to crack or
break any cooling fins. They could fly off during op-
eration. If cooling fins are cracked or broken, re-
place the flywheel.
1. Remove the spacer from the crankshaft.
~
2. Using a plastic-faced mallet, tap and pull the fly-
wheel until it breaks free from the crankshaft.
3. Remove the flywheel from the crankshaft.
~
I
4.
Remove the flywheel key from the crankshaft.
Remove Rocker Arm Assembly
1. Remove the rocker arm cover screw. Remove
rocker arm cover and gasket.
I
I
3.6047.058
3-1 5