Product Identification Numbers; Oil And Fuel Recommendations; Recommended Oil Type - Toro AC-1 Service Manual

PRODUCT IDENTIFICATION
NUMBERS
When ordering parts, or in any communication involv-
ing an engine or product, always give the:
Model Number, and
Serial Number
These numbers are located on a decal (or decals) af-
fixed to the unit (Figure 1-1). The identification de-
.
will be located on the metal boom. The actual
location will vary depending on the type of product.
Figure 1-1. Product Identification Decal
1.0762.005
OIL AND FUEL
RECOMMENDATIONS
WARNING: Explosive Fuel!
Gasoline Is extremely flammable and its vapors
proved containers, in well-ventilated, unoccupied
buildings, away from sparks or flames. Do not fill
the fuel tank while the engine is hot or running,
since spilled fuel could ignite if it comes
in contact
with hot parts or sparks from Ignition. Do not start
the engine near spilled fuel. Do not smoke while
handling gasoline. Never use gasoline as a clean-
ing agent.
, .
can explode if ignited. Store gasoline only in ap-
NOTE: READ THESE INSTRUCTIONS CAREFULLY
BEFORE A t t e m p t i n g TO START OR OPERATE
THIS UNIT. Using old oil or fuel can cause engine
damage. This type of damage will void the engine
warranty
Recommended Oil Type
Toro 4-cycle oil is recommended for use in this engine
(Figure 1-2). If another brand 4-cycle oil is used, use a
high quality SAE 30 weight oil of API (American Pe-
troleum Institute) service class SG, SF, SH.
Using the proper type and weight of oil in the oil pan is
extremely important. Check the oil before each use
and change the oil regularly. Failure to use the correct
oil, or using dirty oil, can cause premature engine
wear and failure.
TORO,
FOUR-CYCLE
ENGINE OIL
I--------
Figure 1-2. Recommended Oil Type.
3.6051.002
1 -7