Toro AC-1 Service Manual page 64

r
4. Hold the pulley with the pawl engagement teeth
towards you. Wrap the rope around the pulley in
the clockwise direction. Make sure all of the
rope is wound onto the pulley.
5.
6.
7.
Apply a small amount of grease (Mobilgrease (R) HP
or equivalent) to the post in the starter housing,
spring, and the backside of the pulley.
Install the rope guide eyelet onto the starter rope.
Place the rope through the eyelet. Install the pull
handle on the rope and secure it with a single
knot.
2.6047.089
2.6060.156
4-1 4
2.6065.157