Remove Cylinder Head. Valve Assembly And - Toro AC-1 Service Manual

DISASSEMBLE ENGINE (cont.)
Remove Cylinder Head, Valve assembly And
Cylinder
1.
Lift the cylinder head off of the cylinder. Remove
the cylinder head gasket.
2. Remove the two (2) valves and valve retainers
from the cylinder head.
NOTE: To make removal of the valves easier, push
down on the valve retainers with your fingers and
rock them to the side.
3.
Remove the two (2) valve springs.
NOTE: The valves cannot be ground. Replace
necessary.
NOTE: The rocker box is factory assembled and
should not be removed from the cylinder head,