Assemble Covers; Install Engine Cover - Toro AC-1 Service Manual

ASSEMBLE COVERS
3.6047.
3.6047.036
__
2.6065.167
Install Engine Cover
1. Install the engine cover with the four (4) Screws.
Torque the rear engine cover screw to 30-35
in-lb (3.5-4.0 N-m).
Torque the top engine cover screws to 15-20
in-lb (1.7-2.2 N-m). ,
Torque the side engine cover screw to 20-25
in-lb (2.5-3.0 N-m).
Before placing the unit back into service, be sure
do the following:
1. Make sure all of the fasteners are tightened
securely.
2.
Fill the fuel tank with fresh gasoline and check
the oil level in the oil pan. Refer to "Oil and Fue
Recommendations" in Part 7
-
General
Information.
speed mixture and idle speed settings. Refer t
"Carburetor Adjustment" in Part 7
-
General
Information.
3.
Adjust the carburetor high speed mixture, idle