Install Intake Baffle; Install Carburetor Mount Insulator - Toro AC-1 Service Manual

ENGINE ASSEMBLY (cont.)
r
2.6047126
-
Install Intake Baffle
1.
Install the intake baffle on the other side of the
cylinder.
Install Carburetor Mount Insulator
1.
Install the two (2) hex nuts on the back of the
carburetor mount insulator.
For Units with Engine Serial Number
405000001
and Greater-The
two
(2) hex nuts
are retained in the carburetor mount insulator.
2. Install a new gasket to the back of the carburetor
mount insulator. Install the carburetor mount
insulator to the crankcase with the two (2)
screws
.
Torque the screws to
30-35
in-lb
(3.3-3.9,
N.m).
5-13