Remove Cam Bracket Assembly; Remove Oil Pan; Remove Seal - Toro AC-1 Service Manual

DISASSEMBLE ENGINE (cont.)
-
Remove Cam Bracket Assembly
1.
Remove the two (2) screws from the cam bracket
assembly. Remove the cam bracket assembly.
Remove Oil Pan
1. Remove the six (6) screws from the oil pan. Re-
move the oil pan.
Remove Seal
NOTE: Remove the seal only if oil is leaking from
he crankcase.
1. Remove the seal from the flywheel side
Of
the
crankcase, using a seal puller or flathead screw
driver.
NOTE: Do not remove the crankshaft from th6
crankcase.
3-1 9