Toro AC-1 Service Manual page 90

ENGINE ASSEMBLY (cont.)
Gasket
(Small)
2.6047.138
4.
Install the clutch cover with the three (3) s c r e w s
If the unit is equipped with a spring, instal
spring.
Torque the screws to 35-45 in-lb
(3.3-5.0
Install Primer Bulb, Carburetor And connecty\ ci
Fuel Line
Use the following procedure to install the primer
bulb, carburetor and fuel lines into the air filter bas
1. Install the primer bulb into the air filter base.
E
screws.
:he
N.m).
t
2.
Install two new carburetor gaskets and the
carburetor into the air filter base. The larger
gasket goes on the air filter base side and
small one on the carburetor to isolator side
the
5-1 7