Sega Daytona Championship USA Owner's Manual page 102

4
Remove the BACK DOOR of the DISPLAY CABINET. Locate and disconnect the connector for the
FOOTWELL LED STRIP.
(2) Unlock the Back door
using the back door key
(supplied)
13
5
Carefully pull the LED STRIP through the access hole and discard. Fit a NEW LED STRIP by following
these instructions in reverse order.
94
LED Connector
FLEX STRIP RGB LED 20CM
390-2012-020RGB
(3) Carefilly remove the
back door.
*The back door is heavy.
Please take care upon
removal.