Start/View Button Panel - Sega Daytona Championship USA Owner's Manual

13-2 START/VIEW BUTTON PANEL

1
Turn off the power.
2
Remove the (4) M4x16 Hex Key machine screws from the START/VIEW Button Panel.
3
Remove the START/VIEW button panel part way to gain access to the connector. Disconnect the connector
and remove.
4
There is a metal clasp fitted at the base of each button. Rotate this metal clasp to unlock it, then remove the
printed circuit board from the button plate.
MSCR HEX (4)
M4x16
CIRCUIT BD
13
91